|
|
|
Al-Samawa Group supplies all accessories needed to build solar power systems. The Solar Light System Controller charges and discharges the accumulators and makes the system stable. Al-Samawa Group's Solar Light System Controllers are listed below.
Solar Light System Controller
|
ASG7001LC
|
ASG7001LC range of Solar Light System Controller
| Model |
CA06
|
CA08
|
CA10
|
| Voltage Rating (V) |
12
|
12
|
12
|
| Temperature Repairing (mV/cell*K) |
-3
|
-3
|
-3
|
| Max PV Panel Current (mA) |
5
|
8
|
10
|
| Max Load Current (mA) |
6
|
8
|
10
|
| Dimensions (L x W x H) |
80 x 100 x 32
|
| Max Section Area (mm2) |
16
|
16
|
16
|
| Loss Current (mA) |
4
|
4
|
4
|
| Temperature (oC) |
-15 to +50
|
| Protection Grade |
IP20
|
Features:
Single-case charge control mode which protects the battery from being fully discharged during the forced charging and fleet charging period.
PWM controlled. Prevent solar panels from working in short circuit. The power switch is connected in series. Automatic intelligent repair temperature. Prevent reverse accumulator by Mosfet.
Complete electronic protection to restrict unstable voltage from PV panels.
The two LED indicates the working state\charging state\discharging protection\malfunction.
All positive polarity grounding is allowed.
|
| |
|
ASG7002LC
|
ASG7002LC range of Solar Light System Controller
| Model |
CML05
|
CML08 |
CML10
|
CML15 |
CML20
|
| Voltage Rating (V) |
12/24V
|
| Temperature Repairing (mV/cell*K) |
-3
|
-3
|
-3
|
-3
|
-3
|
| Max PV Panel Current (mA) |
5
|
8
|
10
|
15
|
20
|
| Max Load Current (mA) |
5
|
8
|
10
|
15
|
20
|
| Dimensions (L x W x H) |
80 x 100 x 32
|
| Max Section Area (mm2) |
16
|
16
|
16
|
16
|
16
|
| Loss Current (mA) |
4
|
|
4
|
|
4
|
| Temperature (oC) |
-15 to +50
|
| Protection Grade |
IP20
|
Features:
Identifies day and night automatically. Illumination time at night can be set by client.
Three LED lights indicates different charging states of the accumulators.
Warning alarm signal fort cutting off the load. LED light indicates the cut-off of the loading.
PWM mode adjusts the pulse width.
Three charging modes: Forced charging – Balanced charging – Fleet charging
Inner temperature auto-repair of 12V or 24V.
Wide-diameter connection ends (Maximum 16mm2)
Different protection modes in case of discharging protection for short circuit and loading. |
| |
|
|
